The AF froth pump has a simple structure, high degree of universality, and easy to install and use. The transmission part of this type of pump is common to that of SP and SPR series slurry. The bearing housing is equipped with a motor seat, that is direct drive or belt drive can be used. The belt pulley can be conveniently replaced to change the speed of the pump to meet the changes in working conditions.
AF froth pumps are widely used in chemical, petroleum, pharmaceutical, papermaking, food, water treatment and other industries. It main function is to mix liquid and gas evenly to form a foamy substance, so as to achieve the purpose of transportation. When installing the AF froth pump, first ensure the stability and stability of the installation position to avoid failures caused by vibration or instability. At the same time, it is necessary to ensure that the motor is in alit with the pump shaft to ensure the normal operation of the pump. In addition, the fastening of each connection part should be checked to prevent leakage or damage caused by loosening.
During use, the operating status of the pump, such as bearing temperature, sealing performance, etc., should be checked regularly to ensure the normal operation of the pump. At the same time, pay attention to observe the working noise and vibration of the pump. If there is any abnormality, it should be stopped for inspection immediately. For pumps that have been inactive or backup for a long time, they should be maintained regularly to extend their service life.
AF froth pump also needs to be operated safely during use. Before starting the pump, make sure that there is no leakage in the system to avoid accidents. During the operation of the pump, it is strictly forbidden to touch the rotating parts with your hands or other objects to avoid injury. At the same time, it is necessary to ensure that the pump’s inlet and export are unimpeded to prevent damage to the pump caused by blockage.
Model | Power | Capacity | Head | Speed | Eff. | Inlet dia. | Outlet dia. |
P(KW) | Q(m3/h) | H(m) | n(r/min) | ŋ% | (mm) | (mm) | |
2QV-AF | 3-15 | 6-43 | 6-30 | 800-1800 | 45 | 100 | 50 |
3QV-AF | 3-18.5 | 23-78 | 5-28 | 700-1500 | 55 | 150 | 75 |
4RV-AF | 5.5-37 | 33-187 | 5-28 | 500-1050 | 55 | 150 | 100 |
6SV-AF | 15-75 | 80-393 | 5-25 | 250-680 | 55 | 200 | 150 |
8SV-AF | 37-110 | 126-575 | 5-26 | 350-650 | 55 | 250 | 200 |
Oct 31,25
What makes Slurry Pumps special?
Oct 31,25
How to choose a suitable slurry pump – slurry pump manufacturer
The slurry pump supplier briefly introduces you to how to choose a suitable slurry pump. During operation, many factors will have an impact on work efficiency,
Oct 31,25
How to Calculate the Head and Flow Rate of a Slurry Pump
Oct 31,25
Slurry pump manufacturer – Part of the mining show booked by CNSME® for 2024
Oct 31,25
Electric Motor Driven Slurry Pumps
Warnings of Slurry Pump Operations A pump is both a pressure vessel and a piece of rotating equipment. All standard safety precautions for such equipment
Oct 31,25
10 Units of Slurry Pumps with Pump Parts for South America
Pump Models: 3/2AH, 4/3AH and 6/4AH, both Metal & Rubber Lined. For more information please check below
bscribe newslette
