The above shown pump is vertical type slurry pump model SV/150S, with the material of wet-end parts A05. Alloy A49 is a corrosion resistant white iron suitable for low pH corrosion duties, where erosive wear is also a problem. The alloy is particularly suitable for Flue Gas Desulphurization (FGD) and other corrosive applications, where the pH is less than 4. The alloy can also be use in other midly acidic environments. A49 has an erosion resistance similar to that of Ni-hard 1.Features:1. No need any seal and the seal water;2. Work normally even if the suction volume is not enough;3. Single casing structure with the advantages of light weight, small volume, easy installation;4. Anti-corrosive wet parts made of natural rubber;5. Transmission shaft and suction pipe could be chosen according to liquid surface of the slurry pool;6. Able to run smoothly under various speeds.
Materials of Construction:
| Part Description | Material |
| Casing | A49- High Chromium Alloy |
| Impeller | A49- High Chromium Alloy |
| Back Liner | A49- High Chromium Alloy |
| Shaft | SUS 316L |
| Mounting Plate | Mild Steel |
| Strainers | SUS 316L |
Oct 31,25
Common Faults & Solutions of Slurry Pumps
Oct 31,25
Similarities and differences between ZJL vertical slurry pump and SP submerged slurry pump
Oct 31,25
Pump knowledge -- Slurry pump concept and applications 1. Concept of pump: all machines that are used to lift liquid, transport liquid, and increase the
Oct 31,25
Slurry pump manufacturer – Part of the mining show booked by CNSME® for 2024
Oct 31,25
Factors Affecting Slurry Pump Selection — Solid Particles
Oct 31,25
How to choose a suitable slurry pump – slurry pump manufacturer
The slurry pump supplier briefly introduces you to how to choose a suitable slurry pump. During operation, many factors will have an impact on work efficiency,
bscribe newslette
